HP/Agilent 81110A Quote

Return To:
Signal Generators

NEED PARTS OR ACCESSORIES?
Click here to check our inventory.

Available MANUALS and SOFTWARE
Click here to check our inventory.

Clearance Inventory!
Click here to view products on clearance

Excess Equipment?
Click here to contact us regarding selling your equipment.

The Agilent 81110A 165 MHz single-/dual-channel Pulse Pattern Generator with one or two Agilent 81111A ouput modules:

This model replaces the "industry-standard" Agilent 8110A with better performance for less money. Relative to the Agilent 81104A, it has the same features with higher frequency. Delay and pulse width (and repetition rate in non-PLL mode) are more accurate - of the order of 3% or, with self-calibration, 0.5%.

The Agilent 81110A 330 MHz single-/dual-channel Pulse Pattern Generator with one or two Agilent 81112A output modules:

The alternative 81112A Output modules allow the 81110A to be used in applications up to 330 MHz. Instead of variable transitions, 800 ps or 1.6 ns edges can be selected. The source impedance is 50-ohm and supplies up to 3.8 Vpp into 50 ohms. Internal channel addition is not implemented.

NOTE:

Each Agilent 81110A 165/330 MHz single- or dual-channel Pulse Pattern Generator requires 1 or 2 of the following output channels:

- Agilent 81111A 165 MHz, 10 V, 50 Ohm into 50 Ohm

- Agilent 81112A 330 MHz, 3.8 V, 50 Ohm into 50 Ohm

Note: Only add together output modules of the same module number. A combination of the Agilent 81111A and Agilent 81112A in one Agilent 81110A is not possible.

HP/Agilent 81110A Features

• Single-/dual-channel Pulse Pattern generator.
• 165 MHz, 10 V, 50 Ohm into 50 Ohm (81111A) OR
• 330 MHz, 3.8 V, 50 Ohm into 50 Ohm (81112A)
• Triggerable / PLL operation selectable
• Pulse / burst / pattern modes selectable
• Self-cal for improved timing accuracy
• BNC outputs: single-ended (81111A) // differential (81112A)

HP/Agilent 81110A Standard Accessories

OPTIONS***

*** The above list of options represents commonly found options. Units available from Global Test Equipment may have a combination of these options. Contact Us for detailed information about the options available on the units in stock.