Editregiontop |
|||||||||||||||||||||
 |
|
||||||||||||||||||||
Service. Solutions. Satisfaction. |
866-409-0400 |
Sell - Rent - Lease - Trade - Buy |
 |
||||||||||||||||||
New and used electronic test equipment from the world's leading manufacturers. |
|||||||||||||||||||||
 |
|
|
|
||||||||||||||||||
|
Return To:
NEED PARTS OR ACCESSORIES? Excess Equipment? |
HP/Agilent 4396A Network/Spectrum Analyzer, 100 kHz to 1.8 GHzThe Agilent 4396A provides excellent vector network, spectrum, and optional impedance measurements for lab and production applications. Gain, phase, group delay, distortion, spurious, CN, and noise measurements often required for evaluating components and circuits can be measured using one instrument. When combined with a test set, the Agilent 4396A provides reflection measurements, such as return loss, SWR, and S parameters. As a vector network analyzer, the Agilent 4396A operates from 100 kHz to 1.8 GHz with 1 mHz resolution; and its integrated synthesized source provides -60 to + 20 dBm of output power with 0.1 dB resolution. The dynamic magnitude and phase accuracy are +/-0.05dB and +/-0.3deg. so that it can accurately measure gain and group delay flatness, which are becoming more important in modern electronics systems. As a spectrum analyzer, the Agilent 4396A operates from 2 Hz to 1.8 GHz with resolution bandwidths (RBWs) spanning 1 Hz to 3 MHz in a 1-3-10 sequence. A fully-synthesized local oscillator allows stable and accurate frequency analysis. Direct A/D conversion (no LOG amplifier is used) results in +/-1.0 dB level accuracy. Noise sidebands fall below -105 dBc/Hz @ 10 kHz offset from carriers, while sensitivity is -150 dBm/Hz at 10 MHz and -147 dBm at 1 GHz. HP/Agilent 4396A Features:
HP/Agilent 4396A Standard Accessories
OPTIONS***
*** The above list of options represents commonly found options. Units available from Global Test Equipment may have a combination of these options. Contact Us for detailed information about the options available on the units in stock. |
 Additional items used with the 4396A: 8120-1839 BNC (m-m) cable 11852B Minimum Loss Pad 5062-3991 Handle Kit 5062-3979 Rack Kit GPIB Cables: 10833A 10833B 10833C 10833D 8447A Pre-Amplifier, 100 kHz to 400 MHz 87405A Pre-Amplifier, 10 MHz to 3 GHz 85024A High Frequency Probe 11940A Close Field Probe 87511B S-Parameter, 75-Ohm 87512A 50-Ohm Type-N Connector 87512B 75-Ohm Type N Connector 11850C 50-Ohm Power Splitter, 3-way 11667A 50-Ohm Power Splitter, 2-way 85032B 50-Ohm, Type-N Cal Kit 11856A 75-Ohm Type-N to BNC Adapter 11857B 75-Ohm Type-N Test Port Cable 11857D 50-Ohm 7mm Test Port Cable 1141A Differential Probe |
|||||||||||||||||||||||||||||||||||||||||||||
| |
|||||||||||||||||||||||||||||||||||||||||||||||
| HOME Global Test Equipment, Inc., is your complete source for all of your global test supply needs! We stock thousands of manuals, parts and accessories for electronic test equipment! |
Global Test Equipment offers:
Counters, Data Acquisition, Lightwave, Logic Analyzers, Meters, Microwave, Network Analyzers, Oscilloscopes, Power Supplies, RF, Signal Analyzers, Signal Generators, Spectrum Analyzers, Switches, Telecommunications, Test Accessories, VXI, Misc.
|
©2004 Global Test Equipment, Inc.1424 Centre Circle, Downers Grove, IL. 60515 (630) 678-0400
Fax: (630) 678-0404 |
|
|
