HP/Agilent 34907A Quote

Back To:
Data Acquisition

NEED PARTS OR ACCESSORIES?
Click here to check our inventory.

Available MANUALS and SOFTWARE
Click here to check our inventory.

Clearance Inventory!
Click here to view products on clearance

Excess Equipment?
Click here to contact us regarding selling your equipment.

The Agilent 34907A module for the 34970A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs - all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.

Digital Input/Ouput
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.

Totalize Input
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors. It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.

Analog Output
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.

HP/Agilent 34907A Features

• 16 bits of digital input and output
• 100 kHz totalizer input
• Two ±12V analog outputs

HP/Agilent 34907A Standard Accessories