Racal 1260-54 Quote

Back To:
VXI

Racal Instruments Model 1260-54 1.3 GHz RF Multiplexer Module

Racal Instruments 1260-54 is ideal for high performance RF applications. The tree configuration eliminates the effect of unterminated stubs which would otherwise severely limit bandwidth performance. Unused inputs may be terminated into optional on-board 50Ω impedances.

The 1260-54 can be used for switching signals from oscilloscopes, spectrum, network or distortion analyzers to a unit under test. The module consists of six independent banks of channels configured as 1x4 multiplexers.

Only one connection at a time can be made to each common bus. Unused inputs may be terminated into optional terminators (purchased separately).There is also a fifth, no connect, position for each bank for situations when no signal is desired on the common bus.

Relay coil current monitoring is available to provide confidence checking. This gives the user assurance of proper relay operation.

The 1260-54 is controlled by Racal Instruments Option 01 message based interface.

Racal 1260-54 Features:

• Configurable as Six 1x4 Tree Multiplexers
• Excellent Crosstalk, Isolation and VSWR Performance to 1.3GHz
• Low Noise Performance Supports Switching of Low-level RF Signals
• Ideal for VHF/UNF Matrix Building Block
• Optional Termination of Input Signals
• Excellent for Oscilloscope or Time Interval Counter Measurements

Racal 1260-54 Standard Accessories:

OPTIONS***

*** The above list of options represents commonly found options. Units available from Global Test Equipment may have a combination of these options. Contact Us for detailed information about the options available on the units in stock.